Panel-mount, Class 0.2 three-phase smart energy meter & protection relay
REECON RE96 panel-mount three-phase energy meter
REECON is the energy intelligence product line engineered by Epteck GmbH, Germany, and supplied and supported in the Kingdom by Rewellx Arabia. The RE96 mounts in the standard 96 × 96 cutout of an LT panel, sub-distribution board or motor control center, replacing a conventional panel meter with Class 0.2 metering, configurable protection and remote visibility. Multiple meters connect over Wi-Fi, Ethernet or RS485 Modbus, so a whole plant is monitored and alarmed from one login.
Real-time load, power factor and consumption at the LT panel main incomer
Per department, production line, machine group or tenant for cost allocation
Time-stamped kWh records, load-trend charts and downloadable reports
THD (voltage and current), phase angle, voltage sag, phase loss and sequence
Emergency load cutoff via contactor, ACB, VCB or shunt MCB on configured faults
Relay switching of capacitor banks on real-time power-factor thresholds
Grid, solar or generator changeover and load shedding at peak tariff
Device temperature, load anomalies and event history for condition-based maintenance
Typical environments: manufacturing plants, textile mills, food processing, chemical and petrochemical facilities, warehouses, commercial buildings, hospitals and healthcare facilities.
Sites with Wi-Fi or Ethernet backhaul
Large sites without reliable Wi-Fi
3P4W (three-phase, four-wire)
150–270 V AC (L–N), rated 230 V AC, 50/60 Hz
2.5–8.5 W (typ. 5.5 W; up to 10 W momentarily); 15–40 mA (typ. 25 mA)
Optional 24 V DC backup input keeps the device running during three-phase outages
0–655 V, resolution 0.01 V
0.005–6 A via CT secondary (resolution 0.001 A); 5 A-secondary CTs, e.g. 100/5 A
−32.768 to +32.767 kW / kVAr, resolution 1 W / VAr
0 to +32.767 kVA, resolution 1 VA
45–65 Hz, resolution 0.01 Hz
−1.000 to +1.000 (0.001) / −180° to +180°
THD+N 0.00–99.99 %; THD and harmonic components 0.00–399 %
1 s typical
Class 0.2 / Class 0.5 (0.1 A ≤ Irms ≤ 100 A)
±0.5 %
5 % relative error
Dual-core 32-bit Xtensa LX7, up to 240 MHz, 512 kB SRAM, 8 kB FRAM
Temperature sensor (−10 to +85 °C, ±1 °C); 3-axis accelerometer (±2/4/8/16 g, 1 Hz–5.3 kHz)
Wi-Fi, BLE 5.0, Ethernet (Modbus TCP), RS485 (Modbus RTU slave); LoRa add-on module
1 × 22–24 V DC (typ. 24 V DC), isolated ground
1 × NC/NO/COM, 30 V DC / 250 V AC, 3 A for an external contactor, ACB, VCB or shunt MCB (not for direct three-phase load switching)
USB 1.1 full-speed OTG, CDC ECM for commissioning and debugging
FSTN monochrome, 79 × 70 mm; 11 live parameter pages plus error, IP and info pages; 4 buttons; password-protected configuration; 85 dB buzzer
46 read-only 16-bit input registers for all live electrical parameters, energy and temperature; function code 0x03; recommended polling 100 ms (RTU) / 1000 ms scan (TCP)
104 × 104 × 88 mm (±2 mm)
Standard 96 × 96 mm, 92.5 × 92.5 mm
315 g (±10 g)
−10 to +70 °C / −20 to +80 °C
5–85 % RH, non-condensing
Panel front of distribution board or LT panel; 4 tool-free clips
Indoor use; display and buttons on the front, all live terminals behind the panel; passive cooling
Key dimensions
Per-phase limits, affected line shown on the display, automatic re-latch when voltage returns within limits
Independent per-phase thresholds with automatic load cutoff and recovery
Load switched off above the 70 °C internal limit, continuous buzzer until the device cools down
Per-line detection, protective shutdown and automatic resume on restoration
Phase (seq V) and CT/current (seq I) sequence-error detection
Configurable threshold for resultant neutral current, with buzzer warning and logging
CHIP OFF error with load cutoff and continuous buzzer
Password-protected local override at the panel, logged and shown in the app and dashboard
REECON RE96
REECON RE96 (Wi-Fi) | REECON RE96 LoRa
3 × CTs with 5 A secondary (e.g. 100/5 A), sized to the panel load
LoRa module | 24 V DC backup power supply
TelliX mobile app (Google Play and Apple App Store) and web dashboard
Your site location and the number of panels or meters, the main incomer and feeder ratings (A), and a photo of the panel with the existing meter cutout.
Engineered in Germany. Proven in the field. Built for Saudi Arabia.
Copyright © 2026 Rewellx Arabia, All Rights Reserved
info@rewellxarabia.com 
+966 54 170 6399